Colloidal Analysis of Particles Extracted from Microalloyed Steels

Different colloidal particle characterization methods are examined for their suitability to determine the particle size distribution of particles extracted from steels. Microalloyed steels are dissolved to extract niobium and titanium carbonitride particles that are important for the mechanical properties of these steels. Such particles have sizes ranging from several nanometers to hundreds of nanometers depending on the precipitation stage during the thermomechanically controlled rolling process. The size distribution of the particles is analyzed by dynamic light scattering (DLS), analytical ultracentrifugation (AUC), and hollow fiber flow field-flow fractionation (HF5) and compared to data obtained for reference particles as well as data from electron microscopy, the standard sizing technique used in metallurgy today. AUC and HF5 provide high-quality size distributions, average over large particle numbers that enables statistical analysis, and yield useful insights for alloy design; however, DLS fails due to a lack of resolution. Important aspects in the conversion and comparison of size distributions obtained for broadly distributed particle systems with different measurement principles and the role of surfactants used in sample preparation are discussed.     

Preparation and Characterization of Al8.31Si1.91Mg3.78O20/Al4.8Si1.2O9.6/Mg2.0Al4.02Si4.98O18 Multiphase Material

A two-step sintering method was used to prepare Al8.31Si1.91Mg3.78O20 (corundum solid solution)/Al4.8Si1.2O9.6 (mullite solid solution)/Mg2.0Al4.02Si4.98O18 (cordierite solid solution) multiphase material, for the purposes of making these three crystal structures have point defects which could help the particles diffuse and transfer at high temperature, accelerate the sintering efficiently and enhance the material strength as well as the bulk density. The impacts of different formulas on the structure and properties of the multiphase material were investigated. With XRD and SEM analyses, for each sample, the crystal structure and microstructure were characterized, the crystalline phase content and cell parameters were determined with Rietveld Quantification software, and the properties were tested. The comparative optimal formula determined was calcinated chamotte of 80wt% and calcinated sludge of 20wt%; and its corresponding bending strength and retention rate of bending strength after a thermal shock were 29.74 MPa and 80.15%, respectively.     

Detection, quantification, and identification of dermorphin in equine plasma and urine by LC–MS/MS for doping control

Dermorphin is a unique opioid peptide that is 30–40 times more potent than morphine. It was misused and went undetected in horse racing until 2011 when intelligence obtained from a few North American race tracks suggested its use. To prevent such misuse, a reliable analytical method became necessary for detection and identification of dermorphin in post-race horse samples. This paper describes the first liquid chromatography–tandem mass spectrometry (LC–MS/MS) method for such a purpose. Equine plasma and urine samples were pre-treated with ethylenediamine tetra-acetic acid and urea prior to solid-phase extraction (SPE) on Oasis MCX cartridges. Resulting eluates were dried under vacuum and analyzed by LC–MS/MS for dermorphin. The matrix effect, SPE efficiency, intra-day and inter-day accuracy and precision, and stability of the analyte were assessed. The limit of detection was 10 pg/mL in plasma and 20 pg/mL in urine, and the limit of confirmation was 20 pg/mL in plasma and 50 pg/mL in urine. Dermorphin in plasma is stable at ambient temperature, but its diastereomer is unstable. With isotopically labeled dermorphin as an internal standard, the quantification range was 20–10,000 pg/mL in plasma and 50–20,000 pg/mL in urine. The intra-day and inter-day accuracy was from 91 % to 100 % for the low, intermediate, and high concentrations. The intra-day and inter-day coefficients of variation were less than 12 %. The method differentiates dermorphin from its diastereomer. This method is very specific for identification of dermorphin in equine plasma and urine, as assessed by BLAST search and targeted SEQUEST search, and by MS/MS spectrum library search. The method has been successfully applied to analysis of samples collected following dermorphin administration to research horses and of official post-race samples.

The effect of length of single‐walled carbon nanotubes (SWNTs) on electrical properties of conducting polymer–SWNT composites

DC conductivity of conjugated polymer‐single‐walled carbon nanotube (SWNT) composite films has been measured for different SWNT concentrations. The composite was prepared by dispersing SWNTs in the poly (3‐octylthiophene), P3OT matrix already dissolved in xylene. The conductivity of the composite films showed a rapid increase as the SWNT concentration increases beyond a certain value. This behavior is explained in terms of percolating paths provided by the SWNTs in the volume of polymer matrix. To investigate the effect of length of nanotubes on the percolation conductivity, different SWNT samples were employed with similar diameter but varying tube lengths. It was found that the conductivity of the composite films is strongly dominated by the length of the nanotubes. Lower percolation limit and high conductivity value of composite films is observed for longer nanotubes. Furthermore, the conductivity is observed to be dependent on the size of the host polymer molecule also. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 89–95, 2010     

Synthesis and properties of copolymers of methyl methacrylate with 2,3,4,5,6‐pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes: An intrachain interaction between methyl ester and fluoro aromatic moieties

2,3,4,5,6‐Pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes were readily copolymerized with methyl methacrylate (MMA) by a free radical initiator. The copolymers were soluble in tetrahydrofuran and acetone. The films obtained were transparent and flexible. The glass transition temperatures (T_gs) of the copolymers were found positively deviated from the Gordon–Taylor equation. The positive deviation could be accounted for by dipole–dipole intrachain interaction between the methyl ester group of MMA and the highly fluorinated aromatic moiety, which resulted in a decrease in the segmental mobility of the polymer chains and the enhanced T_g values of the copolymers. The water absorption of PMMA was greatly decreased by copolymerization of MMA with the highly fluorinated styrenes. With as little as 10 mol % of pentafluoro styrene content in the copolymer, the water absorption was decreased to one‐third of that for pure PMMA. The fluorinated styrenes‐MMA copolymers were thermally stable up to 420 °C under air and nitrogen atmospheres. With 50 mol % of MMA in the copolymer, the copolymer was still stable up to 350 °C. Since these copolymers contain a large number of fluorine atoms, the light absorption in the region of the visible to near infrared is decreased in comparison with nonfluorinated polymers. Thus, these copolymers may be suitable for application in optical devices, such as optical fibers and waveguides. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Assembly of π‐Conjugated Phosphole Azahelicene Derivatives into Chiral Coordination Complexes: An Experimental and Theoretical Study

Aza[n]helicene phosphole derivatives have been prepared from aza[n]helicene diynes by the Fagan–Nugent route. Their photophysical properties (UV/Vis absorption and emission behavior) have been evaluated. Their behavior as P,N chelates towards coordination to Pd^II and Cu^I has been investigated: metal–bis(aza[n]helicene phosphole) assemblies are formed by a highly stereoselective coordination process, as demonstrated by X‐ray crystallography. An aza[6]helicene phosphole bearing an enantiopure helicene part has been obtained, which allows the preparation of enantiopure Pd^II and Cu^I complexes with original topologies and high molar rotation (MR) and circular dichroism (CD). The structure–property relationship established from the experimental data has been studied in detail by theoretical studies (TDDFT calculations of UV/Vis, CD, and MR). Aza[n]helicene phosphole derivatives show π conjugation extended over the entire molecule, and its influence on the MR of aza[6]helicene phosphole 5 c has been demonstrated. Finally, it has been shown that the nature of the metal (coordination geometry and electronic interaction) can have a great impact on the amplitude of the chiroptical properties in metal–bis(aza[n]helicene phosphole) assemblies.     

The Effects of Combined Horizontal and Vertical Heterogeneity on the Onset of Convection in a Porous Medium with Vertical Throughflow

The effects of hydrodynamic and thermal heterogeneity, for the case of variation in both the horizontal and vertical directions, on the onset of convection in a horizontal layer of a saturated porous medium uniformly heated from below, with weak vertical throughflow, are studied analytically for the case of weak heterogeneity. It is found that when the boundary conditions at the upper and lower boundaries are symmetric, the throughflow magnitude and the permeability and conductivity gradients enter the expression for the critical Rayleigh number at second order. The throughflow on its own is stabilizing but the combination of throughflow and heterogeneity may be either stabilizing or destabilizing.     

Spectral image cathodoluminescence,photoluminescence and Raman study of GaAs layers grown on Si substrates

GaAs layers grown on Si substrates by the conformal method were investigated by means of Raman, photoluminescence and cathodoluminescence spectroscopies. The combination of these optical techniques allows a better knowledge of the properties of these layers, with special emphasis on the stress distribution and the incorporation of dopants. In particular, samples intentionally doped, with alternate doped and undoped fringes, have been analyzed. The effective incorporation of Si atoms in the GaAs structure to produce n-type layers and the formation of Si complexes are determined by Raman and cathodoluminescence data. The lateral quasi-periodic stress distribution, typically observed in these layers, is shown to affect the Si incorporation.     

A new hyperchaotic system and its circuit implementation

In this paper, a new hyperchaotic system is presented by adding a nonlinear controller to the three-dimensional autonomous chaotic system. The generated hyperchaotic system undergoes hyperchaos, chaos, and some different periodic orbits with control parameters changed. The complex dynamic behaviors are verified by means of Lyapunov exponent spectrum, bifurcation analysis, phase portraits and circuit realization. The Multisim results of the hyperchaotic circuit were well agreed with the simulation results.